Facebook
Twitter
LinkedIn
YouTube
SysAdminMan
  • Blog
  • Contact

FreePBX 12 – Getting Started Guide

4 June 2015MattFreePBX

When you get your newly installed FreePBX 12 system there are a few steps you will probably want to take to get calls going in and out of your system. This guide goes through those steps.

See below for information on …

1 – Configure an extension

2 – Choose a call provider

3 – Configure a trunk

4 – Configure outbound calling

5 – Configure inbound calling

Once you’ve completed the steps above you’ll be able to make extension to extension calls for free and also make/receive calls to external telephone numbers.

And here are some further guides for configuring your FreePBX system …

6 – Calling local numbers  (and modifying numbers dialed)

These guides were written using a SysAdminMan hosted FreePBX system


Related posts:
  1. FreePBX 2.11 Guide: Local number dialling
  2. FreePBX 12 – Calling local numbers
  3. AsteriskNOW – Getting started video guide
  4. FreePBX 2.11 Guide: Outbound calling
Previous post FreePBX 12 – Configure inbound calling Next post FreePBX 12 – Calling local numbers

Categories

A2Billing is written and maintained by Star2Billing
FreePBX® is a Registered Trademark of Schmooze Com, Inc.

© 2015 SysAdminMan Ltd
Registered in England and Wales, Company No. 7198077
The Apex, 2 Sheriffs Orchard, Coventry, England, CV1 3PP