Sipgatge trunk with Asterisk/FreePBX

I’ve used Sipgate for the past few years with my Asterisk box and have been pretty impressed.

For anyone else looking to use Sipgate with Asterisk/FreePBX here is my trunk setup

Trunk Name: Sipgate

PEER Details:

username=1234567
type=peer
secret=XXXXXXXX
qualify=yes
nat=never
insecure=very
host=sipgate.co.uk
fromuser=1234567
fromdomain=mydomain.com
dtmfmode=rfc2833
disallow=all
context=from-trunk
canreinvite=yes
authuser=1234567
allow=ulaw

Register String:

1234567:XXXXXXXX@sipgate.co.uk/1234567

If you are using NAT between your Asterisk box and Sipgate you will need “canreinvite=no” and “nat=yes” or you will probably get one way audio only on your calls

Edit: context changed to “from-trunk” to make the post clearer

3 thoughts on “Sipgatge trunk with Asterisk/FreePBX

  1. wiseoldowl

    I copied this post over to http://www.freepbx.org/support/documentation/howtos/howto-setting-up-voip-provider-trunks/sipgate-u-k – hope you don’t mind. I will note that FreePBX users should change the context statement to context=from-trunk (if by some chance you then have trouble creating a working inbound route, please see the page at http://www.freepbx.org/support/documentation/howtos/how-to-get-the-did-of-a-sip-trunk – the registration string format given above SHOULD should avoid this problem, but just in case…)

  2. matt Post author

    Copying the post is certainly OK. Many thanks for your comment and the clarification on the context setting.

    Matt

  3. Ian Brown

    Very helpful! I’ve been searching for the answer for sipgate and found your post in google. Thanks

Comments are closed.